Kulkoni, Inc. 1-800-231-2357

Kulkoni, Inc. v921 WARNING: NEVER EXCEED WORKING LOAD LIMIT Page 78 MACHINERY EYE BOLTS—SHOULDER PATTERN Size in Inches Diameter x Shank D B Working Load Limit in Pounds* Approx. Weight Each in Pounds Dimensions in Inches C E F T 1/4 x 1 500 0.06 0.75 0.69 1.19 0.19 5/16 x 1.1/8 900 0.10 0.81 0.81 1.44 0.25 3/8 x 1.1/4 1,400 0.16 0.88 0.94 1.69 0.31 1/2 x 1.1/2 2,600 0.38 1.12 1.12 2.12 0.44 9/16 x 1.5/8 3,000 0.73 1.25 1.19 2.25 0.47 5/8 x 1.3/4 4,000 0.73 1.38 1.31 2.56 0.56 3/4 x 2 6,000 1.04 1.62 1.44 2.81 0.62 7/8 x 2.1/4 7,000 1.61 1.81 1.56 3.19 0.75 1 x 2.1/2 9,000 2.31 2.06 1.69 3.56 0.88 Forged carbon steel, quenched and tempered, self-colored. Dimensions according to ANSI/ASME B18.15, Type 2, Style A. Manufactured in accordance with A.S.T.M. A489. Rated capacities meet or exceed the requirements of ANSI/ASME 18.15 for Type 2, Style A. Never insert the point of a hook in an eyebolt. Always use a shackle. DO NOT SIDE LOAD. WARNING: * Working Load Limit applies to straight line pull only. When applying load at an angle, the Working Load Limit is drasti- cally reduced. Refer to Standard Rigging Handbook for reductions in Working Load Limit of shoulder pattern eyebolts for angular lifting. Above ratings apply only when the shoulder of the eyebolt is in full contact and properly seated with the mating part of the load and the load is applied in the plane of the eye (see illustration). Read important warnings and information on pages 2 - 9 and page 33.