Kulkoni, Inc. 1-800-231-2357

Kulkoni, Inc. v921 WARNING: NEVER EXCEED WORKING LOAD LIMIT Page 56 SHACKLES GALVANIZED SCREW PIN ANCHOR SHACKLES Size in Inches (A) Working Load Limit in Tons Pin Ø in Inches (B) Length Inside in Inches (C) Width Between Eyes in Inches (D) (E) (F) Approx. Weight Each in Pounds Nominal Tolerance 3/16 1/3 1/4 7/8 3/8 ± 1/16 5/8 9/16 0.05 1/4 1/2 5/16 1.1/8 15/32 ± 1/16 7/8 3/4 0.13 5/16 3/4 3/8 1.1/4 17/32 ± 1/16 1 13/16 0.21 3/8 1 7/16 1.7/16 21/32 ± 1/16 1.1/8 15/16 0.33 7/16 1.1/2 1/2 1.11/16 3/4 ± 1/16 1.1/4 1.1/16 0.47 1/2 2 5/8 1.7/8 13/16 ± 1/16 1.3/8 1.3/16 0.78 5/8 3.1/4 3/4 2.3/8 1.1/16 ± 1/16 1.7/8 1.1/2 1.44 3/4 4.3/4 7/8 2.13/16 1.1/4 ± 1/16 2.1/8 1.3/4 2.30 7/8 6.1/2 1 3.5/16 1.7/16 ± 1/16 2.3/8 2 3.50 1 8.1/2 1.1/8 3.3/4 1.11/16 ± 1/8 2.5/8 2.5/16 5.00 1.1/8 9.1/2 1.1/4 4.1/4 1.13/16 ± 1/8 2.7/8 2.5/8 7.00 1.1/4 12 1.3/8 4.11/16 2.1/32 ± 1/8 3.1/4 2.7/8 9.50 1.3/8 13.1/2 1.1/2 5.1/4 2.1/4 ± 1/8 3.1/2 3.1/4 13.00 1.1/2 17 1.5/8 5.3/4 2.3/8 ± 1/8 3.3/4 3.3/8 16.50 1.3/4 25 2 7 2.7/8 ± 3/16 4.1/2 4.1/2 29.00 2 35 2.1/4 7.3/4 3.1/4 ± 3/16 5.1/4 5.1/4 43.00 2.1/4 45 2.1/2 9.1/4 3.7/8 ± 3/16 5.3/4 5.1/2 59.40 2.1/2 55 2.3/4 10.1/2 4.1/8 ± 1/4 6.1/4 6.3/4 86.00 3 85 3.1/4 13 5 ± 1/4 6.3/4 7.3/8 119.50 * The YELLOW shackle pin is the Federally Registered Trademark of Kulkoni, Inc. ** Width Between Eyes as defined by Federal Specification RR-C-271, current revision. Meets the performance requirements of Federal Specification RR-C-271, current revision, Type IV A, Class 2, Grade A. Hot galvanized, forged carbon steel, heat treated, with alloy pins, permanently marked with size and Working Load Limit. Sizes 3/16" through 2" also available in DOMESTIC. *U.S. Registered Trademark No. 2,011,393 Read important warnings and information on pages 2 - 9 and page 33. Do not use screw pin shackles if the pin can roll under load and unscrew.