Kulkoni, Inc. 1-800-231-2357

Kulkoni, Inc. v921 WARNING: NEVER EXCEED WORKING LOAD LIMIT Page 18 6 x 19 CLASS STAINLESS STEEL TYPE 304 Diameter in Inches Approx. Wt. per Foot. in Pounds Breaking Strength in Pounds* 7/16 † 0.35 16,300 1/2 † 0.46 22,800 9/16 † 0.59 28,500 5/8** 0.72 35,000 3/4** 1.04 49,600 7/8** 1.42 66,500 1** 1.85 85,400 According to Federal Specification RR-W-410, current revision, preformed, right regular lay, IWRC. † Some sizes available in Type 316. Type 316 not covered by Federal Specification RR-W-410, current revision — breaking strength may vary. ** Actual construction 6 x 25 (FI) 6 x 36 STAINLESS STEEL TYPE 304 Diameter in Inches Approx. Wt. per Foot. in Pounds Breaking Strength in Pounds* 1/4** 0.116 5,325 5/16** 0.180 8,300 3/8** † 0.240 11,700 7/16 0.350 16,300 1/2 0.460 22,800 9/16 0.590 28,500 5/8 † 0.720 35,000 3/4 † 1.040 49,600 7/8 1.420 66,500 1 † 1.850 85,400 1.1/8 2.340 106,400 1.1/4 2.890 129,400 1.3/8 3.500 153,600 According to Federal Specification RR-W-410, current revision, preformed, right regular lay, IWRC. † Some sizes available in Type 316. Type 316 not covered by Federal Specification RR-W-410, current revision — breaking strength may vary. ** Sizes 1/4", 5/16", and 3/8" are not covered by Federal Specification RR-W-410, current revision. * Listed for comparison only. Actual operating loads should never exceed the recommended design factor or 20% of cat- alog Breaking Strength. 6 x 19 (1 + 6 + 12) WITH IWRC 6 x 25 FILLER WIRE WITH IWRC 6 x 36 WARRINGTON SEALE WITH IWRC STAINLESS STEEL WIRE ROPE Read important warnings and information on pages 2 - 9.